| Ceiling Heater
Selectable Wattages, Back Cans, And Power Disconnects
Recess, Surface, Or
“T” Bar Mounting
Standard Models
Field Installed Accessories
Furnish and install Electric Forced Air Heaters, Series 3380 where specifi ed.
The heaters shall be constructed of a heavy gauge steel housing. The roughin
dimensions are 19-3/16” wide x 4” deep. The fi nish shall be baked-on
powder coat in Ceiling White color. The units shall be available in ratings
from 1500 through 4800 Watts with an optional factory installed single pole
thermostat.
The heaters shall have a low speed 600-RPM motor, which drives a vane
axial blower to deliver a quite 175 CFM’s of down fl ow air. The heating
element shall be of the block fi nned type with large, parallel steel fi ns for
quick heat transfer. Unit shall have as standard, a manual reset capillary
type limit control, for added safety. Unit weight 22 pounds.
Product Specifi cations
Features & Standard Models
Accessories
3000 Series Fan Forced Ceiling Heater
3380 Series Commercial Fan Forced Ceiling Heater
• Wattage selectable at time of installation - models shipped wired to highest Wattage
• Fan purge circuit (requires 2 wire control circuit when remote wall thermostat
is used with the unit)
• Models may not be used with remote double pole thermostat
• Drywall depth embossments on back can
• Powder coated 18 Gauge steel front
• Manual reset thermal limit
• Steel block fi n element
• Propeller style fan blade - 1060 RPM / 100 CFM
• Weight 6 lbs.
• Optional fi eld installed control voltage relays available
• Rough in dimensions - 9 1/4” Wide - 12 1/8” High - 3 5/8” Deep |
